Fix DNS Server Not Responding Error in Windows 10: If you can’t access the internet or any website through the internet, the first thing any of us do is run the network troubleshooter which returns the error “The DNS server isn’t responding” or “Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding”. The error is caused when the Domain Name Server (DNS) is not able to resolve the website IP address.
When you visit a website then the first thing the browser does is contact the DNS Server but sometimes this DNS lookup fails which results in the error. So without wasting any time let’s see How to Fix DNS Server Not Responding Error in Windows 10 with the below-listed troubleshooting guide.
Table of Contents
DNS Server Not Responding Error [SOLVED]
Make sure to create a restore point just in case something goes wrong.
- Make sure you have clear your Browsers Caches and Cookies from your PC.
- Remove unnecessary Chrome extensions which might be causing this issue.
- Proper connection is allowed to Chrome through Windows Firewall.
Method 1: Restart the router
Simply restart your modem and see if the issue is resolved as sometimes the network might have experienced some technical issues which only be overcome by restarting your modem. If you’re still not able to fix this issue then follow the next method.
Method 2: Flush DNS and Reset TCP/IP
1.Right-click on Windows Button and select “Command Prompt(Admin).“
2.Now type the following command and press Enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig /flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4.Reboot to apply changes. Flushing DNS seems to Fix DNS Server Not Responding Error in Windows 10.
Method 3: Use Google DNS
1.Press Windows Key + R then type Control and hit Enter. Next, click on Network and Internet.
2.Next, click Network and Sharing Center then click on Change adapter settings.
3.Select your Wi-Fi then double click on it and select Properties.
4.Now select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
5.Checkmark “Use the following DNS server addresses” and type the following:
Preferred DNS server: 18.104.22.168
Alternate DNS server: 22.214.171.124
6.Close everything and you may be able to Fix DNS Server Not Responding Error in Windows 10.
Method 4: Update Network Adapter Drivers
1.Press Windows key + R and type “devmgmt.msc” in Run dialogue box to open device manager.
2.Expand Network adapters, then right-click on your Wi-Fi controller(for example Broadcom or Intel) and select Update Drivers.
3.In the Update Driver Software Windows, select “Browse my computer for driver software.“
4.Now select “Let me pick from a list of device drivers on my computer.“
5.Try to update drivers from the listed versions.
6.If the above didn’t work then go to the manufacturer’s website to update drivers: https://downloadcenter.intel.com/
7.Reboot to apply changes.
Method 5: Manually Change MAC Address
1.Press Windows Key + X then select Command Prompt (Admin).
2.Type the following command and hit Enter:
3.Find Physical Address under your Network Adapter and note it down on a piece of paper.
4.Press Windows Key + R then type ncpa.cpl and hit Enter.
5.Right-click on your Network adapter and select Properties.
6.Select “Client for Microsoft Networks” then click on Configure.
7.Switch to Advanced tab then under Property select Network Address.
8.Now select Value and then type the Physical Address which you noted earlier.
Note: Make sure to remove any dashes while entering your Physical Address.
9.Click OK and reboot your PC to save changes. After the restart see if you’re able to Fix DNS Server Not Responding Error in Windows 10.
Method 6: Temporarily Disable your antivirus and firewall
1.Right-click on the Antivirus Program icon from the system tray and select Disable.
2.Next, select the time frame for which the Antivirus will remain disabled.
Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.
3.Once done, again try to access the Internet and check if the error resolves or not.
4.Type control in Windows Search then click on Control Panel from the search result.
5.Next, click on System and Security and then click on Windows Firewall.
6.Now from the left window pane click on Turn Windows Firewall on or off.
7.Select Turn off Windows Firewall and restart your PC. Again try to access the internet and see if you’re able to Fix DNS Server Not Responding Error in Windows 10.
If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.
Method 7: Disable Microsoft Virtual WiFi Miniport Adapter
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand Network adapters then click on View and select Show hidden devices.
3.Right-click on Microsoft Wi-Fi Direct Virtual Adapter and select Disable.
4.Reboot your PC to save changes.
Method 8: Disable IPv6
1.Right click on WiFi icon on system tray and then click on “Open Network and Sharing Center.“
2.Now click on your current connection in order to open settings.
Note: If you can’t connect to your network then use Ethernet cable to connect and then follow this step.
3.Click Properties button in the window that just open.
4.Make sure to uncheck Internet Protocol Version 6 (TCP/IP).
5.Click OK then click Close. Reboot your PC to save changes.
- How to Disable Skypehost.exe on Windows 10
- Fix Entry Point Not Found Error in Windows 10
- How to Zoom out on Computer Screen
- Fix DNS_Probe_Finished_NxDomain Error
That’s it you have successfully Fix DNS Server Not Responding Error in Windows 10 but if you still have any questions regarding this post then feel free to ask them in the comment’s section.