Fix Could Not Connect to the Steam Network Error: If you’re facing this error message “Could Not Connect to the Steam Network” while trying to start Steam then you could either start steam in offline mode or exit it completely but there is no fix for the issue. In short, Steam won’t go online and you could only start it in offline mode. There is no single cause as this error has affected thousands of users and all the users have different issues depending on their system configuration and environment. So without wasting any time let’s see how to Fix Could Not Connect to the Steam Network Error with the help of below-listed troubleshooting guide.
Table of Contents
Fix Could Not Connect to the Steam Network Error
Make sure to create a restore point just in case something goes wrong.
Before trying anything just restart your system and again try to run Steam and see if this fix the issue, if not then continue.
Method 1: Change Steam Internet protocol settings
1.Right-click on Steam shortcut on your desktop and select Properties.
Note: If there is no Steam Shortcut then browse to the directory where you have installed steam then right-click on Steam.exe and click on Create Shortcut.
2.Switch to Shortcut tab and in the Target field add -tcp at the end of the line.
“C:\Program Files (x86)\Steam\Steam.exe” -tcp
3.Click Apply followed by OK.
4.Double-click the Shortcut and see if you’re able to launch Steam in Online mode.
Method 2: Clear Steam Download Cache
1.Open your Steam client and then click on Steam from the menu and select Settings.
2.Now from the left-hand menu select Downloads.
3.At the bottom click on Clear Download Cache.
4.Click OK to confirm your actions and put in your login credentials.
5.Reboot your PC to save changes.
Method 3: Troubleshoot Network Settings
1.Press Windows Key + X then select Command Prompt (Admin).
2.Type the following command into cmd and hit Enter after each one:
ipconfig /release ipconfig /all ipconfig /flushdns ipconfig /renew netsh int ip set dns netsh winsock reset netsh winsock reset catalog netsh int ip reset reset.log
3.Reboot your PC to save changes and see if you’re able to Fix Could Not Connect to the Steam Network Error.
Method 4: Disable Enhanced Protected Mode
1.Press Windows Key + R then type inetcpl.cpl and hit Enter to open Internet Properties.
2.Switch to the Advanced tab and scroll down to Security section.
3.Make sure to uncheck Enable Enhanced Protected Mode.
4.Click Apply followed by OK.
5.Restart your PC to save changes.
Method 5: Start Steam in Clean Boot
Sometimes 3rd party software can conflict with Windows and can cause the issue. In order to Fix Could Not Connect to the Steam Network Error, you need to perform a clean boot on your PC then again launch Steam.
Method 6: Delete Windows Temp Files
1.Press Windows Key + R then type %temp% and hit Enter.
2.Now select all the files listed in above folder and permanently delete them.
Note: To permanently delete files press Shift + Delete.
3.Some of the files won’t delete as they are currently in use, so just skip them.
4.Reboot your PC to save changes.
Method 7: Rename ClientRegistry.blob
1.Navigate to the Steam Directory which is generally:
C:\Program Files (x86)\Steam\
2.Find and rename the file ClientRegistry.blob.
3.Restart Steam and the above file would automatically be created.
4.If the issue is resolved then no need to continue, if not then again browse to the steam directory.
5.Run the Steamerrorreporter.exe and relaunch the Steam.
Method 8: Re-install Steam
1.Navigate to the Steam Directory:
C:\Program Files (x86)\Steam\Steamapps
2.You will find all the download games or application in the Steamapps folder.
3.Make sure to back up this folder as you would later need it.
4.Press Windows Key + R then type appwiz.cpl and hit Enter.
5.Find Steam in the list then right-click and select Uninstall.
6.Click Uninstall and then download the latest version of Steam from its website.
7.Run Steam again and see if you’re able to Fix Could Not Connect to the Steam Network Error.
8.Move the Steamapps folder you have backed up to the Steam directory.
Method 9: Perform System Restore
1.Press Windows Key + R and type”sysdm.cpl” then hit enter.
2.Select System Protection tab and choose System Restore.
3.Click Next and choose the desired System Restore point.
4.Follow the on-screen instruction to complete system restore.
5.After reboot, you may be able to Fix Could Not Connect to the Steam Network Error.
Method 10: Temporarily Disable Antivirus and Firewall
1.Right-click on the Antivirus Program icon from the system tray and select Disable.
2.Next, select the time frame for which the Antivirus will remain disabled.
Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.
3.Once done, again try to run Windows Update and check if the error resolves or not.
4.Press Windows Key + X then select Control Panel.
5.Next, click on System and Security.
6.Then click on Windows Firewall.
7.Now from the left window pane click on Turn Windows Firewall on or off.
8.Select Turn off Windows Firewall and restart your PC. Again try to run Steam and see if you’re able to Fix Could Not Connect to the Steam Network Error.
If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.
Method 11: Uncheck Proxy
1.Press Windows Key + R then type “inetcpl.cpl” and hit enter to open Internet Properties.
2.Next, Go to Connections tab and select LAN settings.
3.Uncheck Use a Proxy Server for your LAN and make sure “Automatically detect settings” is checked.
4.Click Ok then Apply and reboot your PC.
Method 12: Run CCleaner and Malwarebytes
2.Run Malwarebytes and let it scan your system for harmful files.
3.If malware is found it will automatically remove them.
4.Now run CCleaner and in the “Cleaner” section, under the Windows tab, we suggest checking the following selections to be cleaned:
5.Once you’ve made certain the proper points are checked, simply click Run Cleaner, and let CCleaner run its course.
6.To clean your system further select the Registry tab and ensure the following are checked:
7.Select Scan for Issue and allow CCleaner to scan, then click Fix Selected Issues.
8.When CCleaner asks “Do you want backup changes to the registry?” select Yes.
9.Once your backup has completed, select Fix All Selected Issues.
10.Restart your PC to save changes and see if you’re able to Fix Could Not Connect to the Steam Network Error.
- Fix High CPU Usage by WUDFHost.exe
- 15 Ways to Speed Up a Slow Windows 10 PC
- Fix Selected boot image did not authenticate error
- Fix Windows 10 Wrong Clock Time Issue
That’s it you have successfully Fix Could Not Connect to the Steam Network Error but if you still have any queries regarding this guide then feel free to ask them in the comment’s section.