Fix Working on updates 100% complete Don’t turn off your computer

Fix Working on updates 100% complete Don’t turn off your computer: Windows updates are a crucial part of System which ensures smooth system performance. Windows 10 automatically download & install important updates from Microsoft Server but sometimes while working on updates on Shutdown or Startup, the update installation get stuck or freezes. In short, you will be stuck on the Windows update Screen and you will see one of the following messages persist for a long time:

Fix Working on updates 100% complete Don't turn off your computer

Working on updates 
100% complete 
Don't turn off your computer

Preparing to configure Windows.
Do not turn off your computer.

Please do not power off or unplug your machine.
Installing update 2 of 5...

Configuring Windows updates
100% complete
Do not turn off your computer.

Getting Windows ready
Don't turn off your computer

Keep your PC on until this is done
Installing update 3 of 5...

If you are stuck on anyone of the screen then the only option you have is restarting your PC. There are several reasons as to why Windows updates get stuck or freezes but most of the times it’s related to software or drivers conflict. So without wasting any more time let’s see how to actually Fix Working on updates 100% complete Don’t turn off your computer with the below-listed troubleshooting guide.

Fix Working on updates 100% complete Don’t turn off your computer

It’s possible that the Windows update might be taking time and it’s not actually stuck, so it’s advice to wait for few hours before trying the below guide.

If you can access the Windows after a restart:

Method 1: Run the Windows Update Troubleshooter

1.Type “troubleshooting” in Windows Search bar and click on Troubleshooting.

troubleshooting control panel

2.Next, from the left window pane select View all.

3.Then from the Troubleshoot computer problems list select Windows Update.

select windows update from troubleshoot computer problems

4.Follow on-screen instruction and let the Windows Update Troubleshoot run.

Windows Update Troubleshooter

5.Restart your PC to save changes.

This should help you to Fix Working on updates 100% complete Don’t turn off your computer but if not then continue with the next method.

Method 2: Rename SoftwareDistribution Folder

1.Press Windows Key + X then select Command Prompt (Admin).

2.Now type the following commands to stop Windows Update Services and then hit Enter after each one:

net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver

Stop Windows update services wuauserv cryptSvc bits msiserver

3.Next, type the following command to rename SoftwareDistribution Folder and then hit Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old

Rename SoftwareDistribution Folder

4.Finally, type the folowing command to start Windows Update Services and hit Enter after each one:

net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Start Windows update services wuauserv cryptSvc bits msiserver

5.Reboot your PC to save changes and this should Fix Working on updates 100% complete Don’t turn off your computer issue.

Method 3: Reset Windows Update components

1.Press Windows Key + X then select Command Prompt (Admin).

command prompt admin

2.Type the following command into cmd and hit Enter after each one:

net stop bits
net stop wuauserv
net stop appidsvc
net stop cryptsvc

Stop Windows update services wuauserv cryptSvc bits msiserver

3.Delete the qmgr*.dat files, to do this again open cmd and type:

Del “%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat”

4.Type the following into cmd and hit Enter:

cd /d %windir%\system32

Reregister the BITS files and the Windows Update files

5.Reregister the BITS files and the Windows Update files. Type each of the following commands individually in cmd and hit Enter after each one:

regsvr32.exe atl.dll
regsvr32.exe urlmon.dll
regsvr32.exe mshtml.dll
regsvr32.exe shdocvw.dll
regsvr32.exe browseui.dll
regsvr32.exe jscript.dll
regsvr32.exe vbscript.dll
regsvr32.exe scrrun.dll
regsvr32.exe msxml.dll
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
regsvr32.exe actxprxy.dll
regsvr32.exe softpub.dll
regsvr32.exe wintrust.dll
regsvr32.exe dssenh.dll
regsvr32.exe rsaenh.dll
regsvr32.exe gpkcsp.dll
regsvr32.exe sccbase.dll
regsvr32.exe slbcsp.dll
regsvr32.exe cryptdlg.dll
regsvr32.exe oleaut32.dll
regsvr32.exe ole32.dll
regsvr32.exe shell32.dll
regsvr32.exe initpki.dll
regsvr32.exe wuapi.dll
regsvr32.exe wuaueng.dll
regsvr32.exe wuaueng1.dll
regsvr32.exe wucltui.dll
regsvr32.exe wups.dll
regsvr32.exe wups2.dll
regsvr32.exe wuweb.dll
regsvr32.exe qmgr.dll
regsvr32.exe qmgrprxy.dll
regsvr32.exe wucltux.dll
regsvr32.exe muweb.dll
regsvr32.exe wuwebv.dll

6.To reset Winsock:

netsh winsock reset

netsh winsock reset

7.Reset the BITS service and the Windows Update service to the default security descriptor:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

8.Again start the Windows update services:

net start bits
net start wuauserv
net start appidsvc
net start cryptsvc

Start Windows update services wuauserv cryptSvc bits msiserver

9.Install the latest Windows Update Agent.

10.Reboot your PC and see if you’re able to Fix Working on updates 100% complete Don’t turn off your computer issue, if not then continue.

Method 4: Perform a Clean Boot

1.Press Windows Key + R then type msconfig and hit enter to System Configuration.

msconfig

2.On General tab, choose Selective Startup and under it make sure the option “load startup items” is unchecked.

system configuration check selective startup clean boot

3.Navigate to the Services tab and checkmark the box that says “Hide all Microsoft services.

hide all microsoft services

4.Next, click Disable all which would disable all the other remaining services.

5.Restart your PC check if the problem persists or not.

6.If the issue is resolved then it’s definitely caused by a third party software. In order to zero in on the particular software, you should enable a group of services (refer the previous steps) at a time then reboot your PC. Keep doing this until you figure out a group of services which are causing this error then check the services under this group one by one until you find which one is causing the problem.

6.After you had finish troubleshooting make sure to undo the above steps (select Normal startup in step 2) in order to start your PC normally.

Method 5: Run System Restore

1.Press Windows Key + R and type”sysdm.cpl” then hit enter.

system properties sysdm

2.Select System Protection tab and choose System Restore.

system restore in system properties

3.Click Next and choose the desired System Restore point.

system-restore

4.Follow on-screen instruction to complete system restore.

5.After reboot, you may be able to Fix Working on updates 100% complete Don’t turn off your computer.

Method 6: Uninstall the particular update causing the issue

1.Press Windows Key + X then select Control Panel.

control panel

2.Under Programs click Uninstall a program.

uninstall a program

3.From the left-hand menu click on View installed updates.

programs and features view installed updates

4.Now from the list right-click on the particular update which is causing this problem and select Uninstall.

uninstall the particular update in order to fix the issue

If you can’t access the Windows:

First, enable legacy Advanced boot option

Method 1: Remove any USB peripherals

If you’re stuck with “Working on updates 100% complete Don’t turn off your computer” then you might want to try to remove any external device connected to PC and make sure you also disconnect any device connected via USB such as pen drives, mouse or keyboard, portable hard disk, etc. Once you have successfully disconnected any such device then again try to update the Windows.

Method 2: Boot into Safe Mode and uninstall that particular update

1. Restart your Windows 10.

2.As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.

3.Insert the Windows 10 bootable installation DVD and restart your PC.

4.When prompted to Press any key to boot from CD or DVD, press any key to continue.

5.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

Repair your computer

6.On choose an option screen, click Troubleshoot.

Choose an option at windows 10

7.On Troubleshoot screen, click Advanced option.

troubleshoot from choose an option

8.On Advanced options screen, click Command Prompt.

Fix Driver Power State Failure open command prompt

9.When the Command Prompt(CMD) open type C: and hit enter.

10.Now type the following command:

BCDEDIT /SET {DEFAULT} BOOTMENUPOLICY LEGACY

11.And hit enter to Enable Legacy Advanced Boot Menu.

Advanced boot options

12.Close Command Prompt and back on the Choose an option screen, click continue to restart Windows 10.

13.Finally, don’t forget to eject your Windows 10 installation DVD, in order to get Boot options.

14.On Boot Option screen choose  “Safe Mode.

Boot into Last Known Good Configuration

15.Once you are in Safe Mode follow the method 6 to uninstall the update causing the trouble.

Method 3: Run Automatic/Startup Repair

1.Insert the Windows 10 bootable installation DVD and restart your PC.

2.When prompted to Press any key to boot from CD or DVD, press any key to continue.

Press any key to boot from CD or DVD

3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.

Repair your computer

4.On choose an option screen, click Troubleshoot.

Choose an option at windows 10 automatic startup repair

5.On Troubleshoot screen, click Advanced option.

select advanced option from troubleshoot screen

6.On the Advanced options screen, click Automatic Repair or Startup Repair.

run automatic repair

7.Wait til the Windows Automatic/Startup Repairs complete.

8.Restart and you have successfully Fix Working on updates 100% complete Don’t turn off your computer issue.

Also, read How to fix Automatic Repair couldn’t repair your PC.

Method 4: Run MemTest86+

Note: Before starting, make sure you have access to another PC as you will need to download and burn Memtest86+ to the disc or USB flash drive.

1.Connect a USB flash drive to your system.

2.Download and install Windows Memtest86 Auto-installer for USB Key.

3.Right-click on the image file which you just downloaded and select “Extract here” option.

4.Once extracted, open the folder and run the Memtest86+ USB Installer.

5.Choose your plugged in USB drive to burn the MemTest86 software (This will format your USB drive).

memtest86 usb installer tool

6.Once the above process is finished, insert the USB to the PC which is giving the A disk read error occurred message.

7.Restart your PC and make sure that boot from the USB flash drive is selected.

8.Memtest86 will begin testing for memory corruption in your system.

Memtest86

9.If you have passed all the test then you can be sure that your memory is working correctly.

10.If some of the steps were unsuccessful then Memtest86 will find memory corruption which means that your “A disk read error occurred” is because of bad/corrupt memory.

11.In order to Fix Working on updates 100% complete Don’t turn off your computer issue, you will need to replace your RAM if bad memory sectors are found.

Method 5: Run System Restore

1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your language preferences, and click Next

2.Click Repair your computer at the bottom.

Repair your computer

3.Now choose Troubleshoot and then Advanced Options.

4..Finally, click on “System Restore” and follow onscreen instructions to complete the restore.

Restor your PC to fix system threat Exception Not Handled Error

5.Restart your PC to save changes.

Method 6: Reset Windows Update components in Safe Mode

Again boot into Safe Mode and follow the method 3 in order to reset Windows Update components which would Fix Working on updates 100% complete Don’t turn off your computer.

Method 7: Run DISM

1.Again open the Command Prompt from the above-specified method.

Fix Driver Power State Failure open command prompt

2.Type the following command in cmd and hit enter after each one:

a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /Online /Cleanup-Image /RestoreHealth

DISM restore health system

3.Let the DISM command run and wait for it to finish.

4. If the above command doesn’t work then try on the below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Note: Replace the C:\RepairSource\Windows with the location of your repair source (Windows Installation or Recovery Disc).

5.Reboot your PC to save changes and this should Fix Working on updates 100% complete Don’t turn off your computer.

Recommended for you:

That’s it you have successfully Fix Working on updates 100% complete Don’t turn off your computer issue but if you still have any questions regarding this post then feel free to ask them in the comment’s section.

Related Articles

Leave A Comment?

This site uses Akismet to reduce spam. Learn how your comment data is processed.