Fix MTP USB Device Driver Installation Failed

Fix MTP USB Device Driver Installation Failed: If you’re trying to connect your mobile phone to your PC but instead you receive the error message “Device driver software was not successfully installed” and “MTP USB Device Failed” then you’re at the right place as today we are going to discuss on how to fix this issue. Well, MTP is a short form for Media Transfer Protocol which is an extension to Picture Transfer Protocol (PTP) communications protocol that allows media files to be transferred atomically to and from portable devices.

If you’re facing the MTP USB Device Failed Installation error then you won’t be able to transfer media files to or from a number of USB devices such as Smartphones, cameras, etc. So without wasting any time let’s see how to actually Fix MTP USB Device Driver Installation Failed Error with the help of the below-listed troubleshooting guide.

Table of Contents

Fix MTP USB Device Driver Installation Failed

Make sure your device isn’t faulty, you could check your device via connecting it to another PC and see if it’s working. Also, create a restore point just in case something goes wrong.

Method 1: Install Windows Media Feature Pack

Go here and download Media Feature Pack. Simply install the update and reboot your PC. And see if you are able to Fix MTP USB Device Driver Installation Failed Error. This Media Feature Pack is primarily for Windows N and Windows KN edition.

Method 2: Update Device Driver

1. Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.

2. Look for your device name or device with a yellow exclamation mark.

Note: Most probably your device will be listed under Portable Devices. Click on View then select Show hidden devices in order to see Portable Devices.

3. Right-click on it and select Update Driver.

4. Now select Browse my computer for driver software.

5. Next, click on “Let me pick from a list of available drivers on my computer“.

6. Select MTP USB Device from the list and click Next.

Note: If you can’t see the MTP USB device then uncheck “Show compatible hardware” and from the left-hand window pane select Android Devices or Mobile Devices or Standard MTP Device and then select MTP USB Device.

7. Wait for the installation to complete then reboot your PC to save changes.

Method 3: Run Hardware & Device Troubleshooter

1. Press the Windows key + R button to open the Run dialogue box.

2. Type ‘control‘ and then press Enter.

3. Search Troubleshoot and click on Troubleshooting.

4. Next, click on View all in the left pane.

5. Click and run the Troubleshooter for Hardware and Device.

6. The above Troubleshooter may be able to Fix the MTP USB Device Driver Installation Failed Error.

Method 4: Manually Install wpdmtp.inf

1. Press Windows Key + R then type the following and hit Enter.

%systemroot%\INF

2. Now inside the INF directory type wpdmtp.inf in the search bar and hit Enter.

3. Once you find the wpdmtp.inf, right-click on it and select Install.

4. Reboot your PC and again try to connect your device.

Method 5: Wipe Cache Partition

Note: Deleting Cache Partition will not delete your files/data as it will simply delete the temporary junk files.

1. Reboot your Mobile into Recovery Mode. In Android devices, the most common way to go to Recovery Mode is to press & hold the Volume Down button and then press & hold the Power button. Only Release the buttons when you boot into Recovery Mode.

Note: Search (Google) your model number and add how to go to recovery mode, this will give you exact steps.

2. Using the Volume Up & Down button navigate and select WIPE CACHE PARTITION.

3. Once Wipe Cache Partition is highlighted press the Power button in order to select the action.

4. Reboot your PC and again connect your phone to your PC.

Method 6: Registry Fix

1. Press Windows Key + R then type regedit and hit Enter to open Registry Editor.

2. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{EEC5AD98-8080-425F-922A-DABF3DE3F69A}

3. Select the {EEC5AD98-8080-425F-922A-DABF3DE3F69A} key and then in the right window pane find UpperFilters.

4. Right-click on UpperFilters and select Delete.

5. Exit Registry and reboot your PC to save changes.

6. If the error is still not resolved then again open Registry Editor.

7. Navigate to the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class

8. Make sure to select Class, then press Ctrl + F and type Portable Devices and hit Enter.

9. On the right-hand window pane, you will find the (Default) value as a Portable Device.

10. Right-click on UpperFilters in the right window pane and select Delete.

11. Reboot your PC and see if you’re able to Fix MTP USB Device Driver Installation Failed Error.

Method 7: Install MTP Porting Kit

Download the official MTP Porting Kit from the Microsoft website and then install it using the setup file. Once the installation finishes reboot your PC and again try to connect your device.

Recommended for you:

That’s it you have successfully Fix MTP USB Device Driver Installation Failed Error but if you still have any question regarding this guide then feel free to ask them in the comment’s section.