- 1 Fix DPC Watchdog Violation BSOD Error
- 1.0.1 Method 1: Make sure Windows is up to date
- 1.0.2 Method 2: Update the IDE ATA/ATAPI Controller drivers
- 1.0.3 Method 3: Disable Fast Startup
- 1.0.4 Method 4: Run SFC and CHKDSK
- 1.0.5 Method 5: Run Driver Verifier
- 1.0.6 Method 6: Try System Restore
- 1.0.7 Method 7: Uninstall Display Drivers
- 1.0.8 Method 8: Repair Install Windows 10
Fix DPC Watchdog Violation BSOD Error: DPC Watchdog Violation is a Blue Screen of Death (BSOD) Error which is very common among Windows 10 users. DPC stands for Deferred Procedure Call and if the DPC Watchdog Violation occurs this means the watchdog detects a DPC running too long and therefore it stops the process in order avoid corrupting your data or your system. The error occurs because of incompatible drivers and even though Microsoft has released updates to fix the issues even then few users still face the problem.
Now there are a lot of drivers on Windows 10 and it would be impossible to check every other driver hence many users recommend the clean install of Windows 10. But that should be a last resort to users as there are many other ways you could fix the issue. So without wasting any time let’s see how to actually Fix DPC Watchdog Violation BSOD Error with the help of below-listed troubleshooting guide.
Fix DPC Watchdog Violation BSOD Error
Make sure to create a restore point just in case something goes wrong.
Method 1: Make sure Windows is up to date
1.Press Windows Key + I then select Update & Security.
2.Next, again click Check for updates and make sure to install any pending updates.
3.After the updates are installed reboot your PC and see if you’re able to Fix DPC Watchdog Violation BSOD Error.
Method 2: Update the IDE ATA/ATAPI Controller drivers
1.Press Windows Key + R then type devmgmt.msc and hit Enter to open Device Manager.
2.Expand IDE ATA/ATAPI Controllers and then right-click on your device and select Update Driver.
3.Select Browse my computer for driver software.
4.On the next screen, click on “Let me pick from a list of available drivers on my computer”.
5.Choose Standard SATA AHCI Controller from the list and click Next.
6.Wait for the installation to finish then reboot your PC.
Method 3: Disable Fast Startup
1.Press Windows Key + R then type control and hit Enter to open Control Panel.
2.Click on Hardware and Sound then click on Power Options.
3.Then from the left window pane select “Choose what the power buttons do.“
4.Now click on “Change settings that are currently unavailable.“
5.Uncheck “Turn on fast startup” and click on Save changes.
6.Reboot your PC and see if you’re able to Fix DPC Watchdog Violation BSOD Error.
Method 4: Run SFC and CHKDSK
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Now type the following in the cmd and hit enter:
Sfc /scannow sfc /scannow /offbootdir=c:\ /offwindir=c:\windows (If above fails then try this one)
3.Wait for the above process to finish and once done restart your PC.
4.Next, run CHKDSK from here Fix File System Errors with Check Disk Utility(CHKDSK).
5.Let the above process complete and again reboot your PC to save changes.
Method 5: Run Driver Verifier
This method is only useful if you can log into your Windows normally not in the safe mode. Next, make sure to create a System Restore point.
Run Driver Verifier in order Fix DPC Watchdog Violation BSOD Error. This would eliminate any conflicting driver issues due which this error can occur.
Method 6: Try System Restore
1.Press Windows Key + R and type”sysdm.cpl” then hit enter.
2.Select System Protection tab and choose System Restore.
3.Click Next and choose the desired System Restore point.
4.Follow the on-screen instruction to complete system restore.
5.After reboot, you may be able to Fix DPC Watchdog Violation BSOD Error.
Method 7: Uninstall Display Drivers
1.Right-click on your NVIDIA graphic card under device manager and select Uninstall.
2.If asked for confirmation select Yes.
3.Press Windows Key + X then select Control Panel.
4.From Control Panel click on Uninstall a Program.
5.Next, uninstall everything related to Nvidia.
6.Reboot your system to save changes and again download the setup from the manufacturer’s website.
5.Once you are sure that you have removed everything, try installing the drivers again. The setup should work without any problems.
Method 8: Repair Install Windows 10
This method is the last resort because if nothing works out then this method will surely repair all problems with your PC. Repair Install just using an in-place upgrade to repair issues with the system without deleting user data present on the system. So follow this article to see How to Repair Install Windows 10 Easily.
Recommended for you:
- Fix Windows can’t find or start the camera
- Fix WHEA_UNCORRECTABLE_ERROR on Windows 10
- How To Fix Screen Resolution changes by itself issue
- Fix Windows Cannot Be Installed to Drive 0
That’s it you have successfully Fix DPC Watchdog Violation BSOD Error but if you still have any queries regarding this post feel free to ask them in the comment’s section.