Fix Can’t Connect to this network issue in Windows 10

Fix Can’t Connect to this network issue in Windows 10: You probably can’t connect to your WiFi and that’s why you’re seeing the error “Can’t Connect to this network” in Windows 10. No matter how many times you try you will always receive this error until you reboot your PC which becomes very frustrating after a few times. This problem seems to mostly occur with Windows 10 users who have Intel Wireless card but it doesn’t mean it’s limited to Intel only.

Fix Can't Connect to this network issue in Windows 10

While there is possible explanation such as corrupted or outdated wireless drivers, conflicting 802.11n Mode, antivirus or firewall possible intrusion, IPv6 issues etc but there is no single cause as to why this error occurs. It mostly depends on user system configuration and that’s why we have listed all the possible troubleshooting methods which seem to fix the issue. So without wasting any time let’s see how to actually fix this error.

Fix Can’t Connect to this network issue in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Forget WiFi Network

1.Click on the Wireless icon in the system tray and then click Network Settings.

click Network settings in WiFi Window

2.Then click on Manage Known networks to get the list of saved networks.

click Manage Known networks in WiFi settings

3.Now select the one which Windows 10 won’t remember the password for and click Forget.

click Forgot network on the one Windows 10 won't remember the password

4.Again click the wireless icon in the system tray and connect to your network, it will ask for the password, so make sure you have the Wireless password with you.

enter the password for the wireless network

5.Once you have entered the password you will connect to the network and Windows will save this network for you.

6.Reboot your PC and again try to connect to the same network and this time Windows will remember the password of your WiFi. This method seems to Fix Can’t Connect to this network issue in Windows 10.

Method 2: Disable and then Enable your WiFi-adapter

1.Press Windows Key + R then type ncpa.cpl and hit Enter.

ncpa.cpl to open wifi settings

2.Right-click on your wireless adapter and select Disable.

Disable the wifi which can't configure the ip

3.Again right-click on the same adapter and this time choose Enable.

Enable the Wifi to reassign the ip

4.Restart your and again try to connect to your wireless network and see if you’re able to Fix Can’t Connect to this network issue.

Method 3: Flush DNS and Reset TCP/IP

1.Right-click on Windows Button and select “Command Prompt(Admin).

command prompt with admin rights

2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew

ipconfig settings

3.Again open Admin Command Prompt and type the following and hit enter after each one:

  • ipconfig /flushdns
  • nbtstat –r
  • netsh int ip reset
  • netsh winsock reset

resetting your TCP/IP and flushing your DNS.

4.Reboot to apply changes. Flushing DNS seems to Fix Can’t Connect to this network issue in Windows 10.

Method 4: Run Network Troubleshooter

1.Right-click on the network icon and select Troubleshoot Problems.

Troubleshoot problems network icon

2.Follow the on-screen instructions.

3.Now press Windows key + W and type Troubleshooting hit enter.

troubleshooting control panel

4.From there select “Network and Internet.

select Network and Internet in troubleshooting

5.In the next screen click on Network Adapter.

select Network Adapter from network and internet

6.Follow the on-screen instruction to fix the issue.

Method 5: Uninstall your Network Adapter

1.Press Windows Key + R then type “devmgmt.msc” and hit Enter to open Device Manager.

devmgmt.msc device manager

2.Expand Network Adaptor and then right-click on the Wireless Network Adaptor and select Uninstall.

right click on Network adapter and select Uninstall

3.If asked for confirmation select Yes.

4.Reboot to save changes and then try to reconnect your Wireless.

Method 6: Update WiFi Drivers

1.Press Windows Key + R then type devmgmt.msc and hit Enter.

devmgmt.msc device manager

2.Expand Network adapters then right-click on your installed network adapter and select Update Driver Software.

3.Then choose Search automatically for updated driver software.

search automatically for updated driver software

4.Reboot your PC to save changes. If the problem still persists then follow the next step.

5.Again select Update Driver Software but this time choose ‘Browse my computer for driver software.

browse my computer for driver software

6.Next, at the bottom click ‘Let me pick from a list of device drivers on computer.’

let me pick from a list of device drivers on my computer

7.Select the latest driver from the list and click Next.

8.Let the Windows install drivers and once complete close everything.

9.Reboot your PC to save changes and you may be able to Fix Can’t Connect to this network issue in Windows 10.

Method 7: Temporarily Disable Antivirus and Firewall

Sometimes the Antivirus program can cause Can’t Connect to this network issue in Windows 10 and in order to verify this is not the case here you need to disable your antivirus for a limited time so that you can check if the error still appears when the antivirus is off.

1.Right-click on the Antivirus Program icon from the system tray and select Disable.

Disable auto-protect to disable your Antivirus

2.Next, select the time frame for which the Antivirus will remain disabled.

select the duration until when the antivirus will be disabled

Note: Choose the smallest amount of time possible for example 15 minutes or 30 minutes.

3.Once done, again try to connect to the WiFi network and check if the error resolves or not.

4.Press Windows Key + I then select Control Panel.

control panel

5.Next, click on System and Security.

6.Then click on Windows Firewall.

click on Windows Firewall

7.Now from the left window pane click on Turn Windows Firewall on or off.

click Turn Windows Firewall on or off

8.Select Turn off Windows Firewall and restart your PC. Again try to connect to the WiFi network and see if the issue is resolved or not.

If the above method doesn’t work make sure to follow the exact same steps to turn on your Firewall again.

Method 8: Disable IPv6

1.Right click on WiFi icon on system tray and then click on “Open Network and Sharing Center.

open network and sharing center

2.Now click on your current connection in order to open settings.
Note: If you can’t connect to your network then use Ethernet cable to connect and the follow this step.

3.Click Properties button in the window that just open.

wifi connection properties

4.Make sure to uncheck Internet Protocol Version 6 (TCP/IP).

uncheck Internet Protocol Version 6 (TCP IPv6)

5.Click OK then click Close. Reboot your PC to save changes.

Method 9: Change 802.11 Channel Width

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections.

ncpa.cpl to open wifi settings

2.Now right-click on your current WiFi connection and select Properties.

3.Click Configure button in the Wi-Fi properties window.

configure wirless network

4.Switch to the Advanced tab and select the 802.11 Channel Width.

set 802.11 Channel Width to 20 MHz

5.Change the value of 802.11 Channel Width to 20 MHz then click OK.

6.Close everything and reboot your PC to save changes. You may be able to fix the error Can’t Connect to this network with this method but if for some reason it didn’t work for you then continue.

Method 10: Make sure your Adapter and Router are using same security settings

1.Open Network and Sharing Center and click on your current WiFi connection.

2.Click Wireless Properties in the new window that just opened.

click Wireless Properties in WiFi status window

3.Switch to Security tab and select the same security type that your router is using.

Security tab and select the same security type that your router is using

4.You might have to try different options in order to fix this issue.

5.Restart your PC to save changes.

Method 11: Disable 802.11n Mode

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections

2.Now right-click on your current WiFi connection and select Properties.

3.Click Configure button in the Wi-Fi properties window.

4.Switch to the Advanced tab and select the 802.11n Mode.

make sure to Disable 802.11n Mode

5.Make sure to set it’s value to Disabled then click OK.

6.Close everything and reboot your PC to save changes. This may be able to Fix Can’t Connect to this network issue in Windows 10 but if not then continue.

Method 12: Add the connection manually

1.Right click on WiFi icon in the system tray and select Open Network and Sharing Center.

open network and sharing center

2.Click Set up a new connection or network in the bottom.

click setup a new connection or network

3.Choose “Manually connect to a wireless network” and click Next.

Choose Manually connect to a wireless network

4.Follow on-screen instruction and Enter username & password to configure this new connection.

set up the new WiFi connection

5.Click Next to finish the process and check if you’re able to connect to this network without any problems.

Method 13: Change the Wireless Network Mode to Default

1.Press Windows Key + R then type ncpa.cpl and hit Enter to open Network Connections

2.Now right-click on your current WiFi connection and select Properties.

3.Click Configure button in the Wi-Fi properties window.

4.Switch to the Advanced tab and select Wireless Mode.

5.Now change the value to 802.11b or 802.11g and click OK.
Note: If the above value doesn’t seem to fix the problem then try different values in order to fix the issue.

change the value of Wireless Mode to 802.11b or 802.11g

6.Close everything and restart your PC and see if the error Can’t Connect to this network is resolved or not.

Method 14: Use Command Prompt

1.Press Windows Key + X then select Command Prompt (Admin).

command prompt admin

2.Type the following command and hit Enter after each one:

reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f

netcfg -v -u dni_dne

configure Network using following commands

3.Close cmd and reboot your PC.

Method 15: Perform a Clean Boot

Sometimes 3rd party software can conflict with Windows Store and therefore, you should not be able to install any apps from Windows apps store. In order to Fix Can’t Connect to this network issue in Windows 10, you need to perform a clean boot in your PC and diagnose the issue step by step.

Perform Clean boot in Windows. Selective startup in system configuration

Recommended for you:

That’s it you have successfully Fix Can’t Connect to this network issue in Windows 10 but if you still have any queries regarding this post feel free to ask them in the comment’s section.

Was this article helpful?

Related Articles

Leave A Comment?