Fix igdkmd64.sys Blue Screen of Death Error

Fix igdkmd64.sys Blue Screen of Death Error: igdkmd64.sys is a software component of Intel Graphic Card drivers for Windows and intel provides this kernel mode graphics driver on an OEM basis to laptop manufacturers. IGDKMd64 stands for Intel Graphics Driver Kernel Mode 64-bit. Several different problems involve this driver which causes the Blue Screen of Death (BSOD) have been reported including VIDEO_TDR_ERROR, igdkmd64.sys, and nvlddmkm.sys.

Fix igdkmd64.sys Blue Screen of Death Error

TDR stands for Timeout, Detection, and Recovery and when attempting to reset the display drivers and recover from a timeout you will see VIDEO_TDR_ERROR (igdkmd64.sys) error. Unfortunately, this error can’t be solved by merely deleting the igdkmd64.sys, in fact, you can’t even delete or edit this file as its one of the critical system files of Microsoft system. SYS is a file extension for system file device driver used by Microsoft Windows and it also holds the system settings for drivers which are required by Windows to talk to your hardware and devices.

Fix igdkmd64.sys Blue Screen of Death Error

It’s recommended to create a restore point just in case something goes wrong. Also before proceeding make sure you are not overclocking your PC or GPU and if you are, then stop it immediately to Fix igdkmd64.sys Blue Screen of Death Error.

Method 1: Roll back Intel Graphic Card Drivers

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

devmgmt.msc device manager

2.Expand Display adapters then right-click on Intel(R) HD Graphics and select Properties.

right click on Intel(R) HD Graphics 4000 and select Properties

3.Now switch to Driver tab then click on Roll Back Driver and press Ok to save settings.

Click on Roll back driver

4.Reboot your PC to save changes.

5.If the problem is still not resolved or the Roll Back Driver option was grayed out then continue.

6.Again right-click on the Intel(R) HD Graphics but this time select uninstall.

uninstall drivers for Intel Graphic Card 4000

7.If ask for confirmation select Ok and restart your PC to save changes.

8.When the PC restart it will automatically load the default drivers of Intel Graphic Card.

Method 2: Run System File Checker (SFC) and Check Disk (CHKDSK)

1.Press Windows Key + X then click on Command Prompt(Admin).

command prompt with admin rights

2.Now type the following in the cmd and hit enter:

Sfc /scannow
sfc /scannow /offbootdir=c:\ /offwindir=c:\windows

SFC scan now command prompt

3.Wait for the above process to finish and once done restart your PC.

4.Next, run CHKDSK from here How To Fix File System Errors with Check Disk Utility(CHKDSK).

5.Let the above process complete and again reboot your PC to save changes.

Method 3: Change the Intel graphics settings

1.Right-click in the empty area on the Desktop and select Graphic Properties.

Right click on desktop and select Graphics Properties

2.Next, in Intel HD Graphics Contol Panel click on 3D.

click on 3D in Intel HD Graphics Contol Panel

3.Make sure the settings in 3D are set to:

Set Application Optimal Mode to Enable.
Set Multi-Sample Anti-Aliasing to Use Application Settings.
Set Conservative Morphological Anti-Aliasing to Turn Off.

make sure Application Optimal Mode is enable

4.Go back to the main menu and click on Video.

5.Again make sure that the settings in the video are set to:

Standard Color Correction to Application Settings.
Input Range to Application Settings.

ste standard color correction and input range to application settings

6.Restart after any changes and see if you’re able to Fix igdkmd64.sys Blue Screen of Death Error.

Method 4: Make sure Windows is up to date

1.Press Windows Key + I to open Windows Settings then select Update & Security.

Update & security

2.Next, under Update status click on ‘Check for updates.

click check for updates under Windows Update

3.If updates are found make sure to install them.

4.Finally, reboot your system to save changes.

This method may be able to Fix igdkmd64.sys Blue Screen of Death Error because when Windows is updated, all the drivers are also updated which seems to fix the issue in this particular case.

Method 5: Disable Intel’s integrated GPU

Note: This method only applies to user’s which have a discrete graphic card such as NVIDIA, AMD etc.

1.Press Windows Key + R then type “devmgmt.msc” (without quotes) and hit enter to open Device Manager.

devmgmt.msc device manager

2.Expand Display adapters then right-click on Intel(R) HD Graphics and select Disable.

right click on garphic card and select Disable

3.Restart your PC to save changes and your system will automatically switch to your discrete graphic card for display purpose which will definitel fix this issue.

That’s it you have successfully Fix igdkmd64.sys Blue Screen of Death Error but if you still have any questions regarding this post feel free to ask them in the comment’s section.

1 thought on “Fix igdkmd64.sys Blue Screen of Death Error”

  1. I have severally installed new windows 10 but the problem persisted, I even changed the RAM …can’t there be solution to this driver problem?

Leave a Comment

Your email address will not be published. Required fields are marked *